Browsing by Author "Olukokun, Tolulope O."
Now showing 1 - 2 of 2
Results Per Page
Sort Options
Item Comparative Analysis of Selected Animal and Vegetable Oils Suitability in Machining of Plain Carbon Steels(International Journal of Engineering and Management Research, 2019-04-28) Alabi, Ismaila O.; Okediji, Adebunmi P.; Ogedengbe, Temitayo S.; Joseph, Ojotu I.; Olukokun, Tolulope O.Due to the alarming rate in public awareness on environmental issues, there has been growing demand for biodegradable materials which has opened an avenue for using vegetable and animal oils as alternatives to petroleumbased polymeric materials in the market, most especially in machining operations. Thus, research on biodegradable functional fluids has emerged as one of the top priorities in lubrication, due to their applicability in many diverse areas. In this quest, there is need to conduct machining trials to determine the suitability of these oils in metal cutting (turning) operations of plain carbon steels. This study investigate the effect of the selected cutting fluids on certain parameters like machine removal rate (MRR), machining time, tool wear and spindle power consumption, etc. under different machining combination in turning operations of plain carbon steels obtained from universal steel Ikeja, Nigeria, using 150 x 10 HSS cutting tool. The selected oils purchased from Ogunpa market in Ibadan, Nigeria, were sieved to remove any foreign particles or dirt. The solution; water, based-oil, and emulsifier (to allow thorough mixing of water and oil without separation), were mix at an elevated temperature of 550C in a proportion 4:1:3. Experimental results clearly showed that Conventional cutting fluid might be replaced with Non-conventional cutting fluids (vegetable and animal based) as they give better performance. With slight modifications and deliberate but careful alterations in some of the components of such oils, even better performing cutting fluids could be obtained.Item Development of an Indigenously Made Diesel Fired Crucible Furnace(Proceedings of the 3rd International Conference of Energy Harvesting, Storage, and Transfer (EHST'19) Ottawa, Canada, 2019-06-18) Olukokun, Tolulope O.; Adeyemi, Adekunle A.; Alabi, Ismaila O.; Aderonmu, Mudasiru O.; Kareem, Mutiu O.The technological advancement of any nation have been influenced and uplifted by the extent to which it can usefully harness and convert its mineral resources. The productions of metal in foundries and in all human lives have become a general practice. This work deals with the design, fabrication and performance evaluation of a diesel-fired crucible furnace suitable for use both in the rural and urban areas for casting of different types of metals using indigenously sourced materials and technology. The components of furnace were furnace casing, crucible, furnace cover, burner housing, furnace cover stand, base stand and burner. Mild steel sheet was used for the fabrication of the furnace, while the other components needed for the design were selected based on functionality, durability, cost and local availability. Experimental tests were performed to evaluate the performance of the furnace. The average heating rate of 19.54°C/min was recorded by the furnace and attained a temperature as high as 1420 °C. The furnace also had a melting rate of 454.55g/min for Aluminium. The thermal efficiency of the furnace was determined to be 10.80%. The low value was as result of the large energy wastage due to the type of insulator used in making the furnace wall. The furnace is environmental friendly without health hazards to the workers and can be moved from one place to another unlike the local one.