Effect of Annealing on Machinability of Grey Cast Iron

Simple item page
dc.contributor.authorOgedengbe, Temitayo S.
dc.contributor.authorAladejana, Yezeed
dc.contributor.authorYussouff, Abiodun A.
dc.date.accessioned2019-07-10T14:17:36Z
dc.date.available2019-07-10T14:17:36Z
dc.date.issued2019-07-01
dc.description.abstractThis study investigates the influence of process parameter on machined cast iron under varying material strength and cutting conditions. The three process parameters considered in this study are spindle speed, feed rate and depth of cut. The cast iron bars were annealed and machined under both wet and dry cutting conditions. The signal-to-noise (S/N) ratio was used to analyze results generated, identify optimal process parameters (factors) and analyze the effect of these parameters on tool-tip temperature. Taguchi design of Minitab 18 was employed to optimize and analyze results. Results shows that the spindle speed was the most significant factor affecting tool-tip temperature reduction, followed by feed rate, while the depth of cut has least role to play on tool-tip temperature. Depth of cut and spindle speed both significantly influenced increment in material removal rate. The annealed cast iron bar had a better surface integrity than the Unannealed sample bars. Conclusively, the preferred condition for machining grey cast iron bar was annealed and wet machining condition.en_US
dc.identifier.issn2180-3811
dc.identifier.urihttp://journal.utem.edu.my/index.php/jet/article/view/4771
dc.identifier.urihttp://repository.elizadeuniversity.edu.ng/jspui/handle/20.500.12398/280
dc.language.isoenen_US
dc.publisherJournal of Engineering and Technologyen_US
dc.relation.ispartofseriesVol.10, No. 1;22-26
dc.subjectCast Ironen_US
dc.subjectSurface Roughnessen_US
dc.subjectMaterial Removal Rate,en_US
dc.subjectTurningen_US
dc.subjectTool-Tip Temperatureen_US
dc.titleEffect of Annealing on Machinability of Grey Cast Ironen_US
dc.typeArticleen_US
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Ogedengbe et al. 2019 Effect of Annealing on Machinability of Grey Cast Iron.pdf
Size:
907.66 KB
Format:
Adobe Portable Document Format
Description:
Article full-text
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.61 KB
Format:
Item-specific license agreed upon to submission
Description:
Download
Collections
Research Articles